Vertex Standard VX-2100E/2200E Series Mobile Radios
- Six programmable keys
- 1-Character numeric display
- CTCSS / DCS Encode and Decode
• Six programmable keys
• 8-Character alphanumeric display (VX-2200)
• 1-Character numeric display (VX-2100)
• RSSI signal strength indicator
• 2-Tone encode and decode
• 5-Tone signaling
• CTCSS / DCS Encode and Decode
• BCLO, BTLO, TOT
• DTMF Paging
• Stun / kill / revive (5-tone)
• Remote listen
• Lone Worker
• Programmable minimum volume button
• D-Sub 15 Pin accessory connector
• Public address / horn alert
• Radio-to-radio cloning
General Specification
Frequency Range
VHF: 134 – 174 MHz
UHF: 400 – 470 MHz
Number of Channels and Groups
128 and 8 Groups (VX-2200)
8 and 1 Groups (VX-2100)
Power Supply Voltage
13.6 V DC ± 15%
Channel Spacing
12.5 / 20 / 25 kHz
PLL Steps
VHF: 2.5 / 5 / 6.25 kHz
UHF: 5 / 6.25 kHz
Current Consumption
TX: 6 A RX: 2.5 A, Standby: 200 mA
Operating Temperature Range
–30°C to +60°C
Frequency Stability
Better than ±2.5 ppm
RF Input-Output Impedance
50 Ohms
Dimension (W x H x D)
165 x 45 x 155mm
Weight (Approx.)
1.3 kg
Receiver Specification: measured by EN 300 086
Sensitivity 20dB SINAD
-4 dB µV emf / -2 dB µV emf
Adjacent Channel Selectivity
VHF: 75 / 65 dB
UHF: 70 / 65 dB
Intermodulation
68 dB
Spurious and Image Rejection
57 dBm
Audio Output
Internal: 4 W @ 18 Ohms, 5% THD
External: 12 W @ 4 Ohms, 5% THD
Transmitter Specification: measured by EN 300 086
Output Power
25 / 12.5 / 5 / 1 W
Modulation
16K0F3E, 11K0F3E
Modulation Limiting
±5.0 kHz @ 25 kHz
±4.0 kHz @ 20 kHz
±2.5 kHz @ 12.5 kHz
Audio Distortion
< 3% @ 1kHz
Spurious Emission
-36 dBm ≤ 1 GHz, -30 dBm > 1 GHz
Hum and Noise
VHF: 50/44 dB
UHF: 48/42 dB