- Electronic taximeter printer capable
- Smart tariffs automatically managed by the time, date, distance and fare amount
- Self-powered clock/calendar
The Digitax F1 Taximeter has several communication channels that make possible the communication with the external world.
Two independent RS232 serial ports at baud rate from 300 to 115200 and a 4 wire synchro channel plus a special printer driver, allow the interfacing to several devices at the same time.
The Commtax 2 included protocol allows remote managing of all the taximeter, magnetic Credit Card reader , chip card and printer functions.
The link to a dispatch system or another mobile terminal is accomplished on the RS232 port at any baud rate from 300 to 115200 using a frame structure N, 8, 1: signal level +/- 12 V, using the protocol COMMTAX 2 described in this document.
| Specifications | |
| Dimension (WxHxD mm) | 17 x 4,5 x 2,5 |
| Weight | Gr. 350 ca. |
| Displays | Fare counter: - 6 Digits Red High-Luminosity Led Extra counter: - 5 Digits Red High-Luminosity Led Illuminated Front Text 1 Digit tariff index |
| Power Supply | From 8,5 to 16 Volts |
| Temperature | From -15 to 70 °C. |
| Relative Humidity | 95% |
| Mechanical Strenght | 3 g |
| Distance Unit | From 10 cm. to 6553 meters Step 10 cm. |
| Waiting Time Unit | From 0,1 sec. to 6553 Step 0,1 sec. |
| Totalizator Mode | Dataflash 1Mb - 45 + 45 Statistic Memory - 12 x 45 Monthly Statistic - 50 x 45 Statistics for each Driver |
| Tariff Structure | 63 Smart and fully indipendent Tariffs +8 Night Tariffs +8 Holiday Tariffs +4 Autofare Tariffs +4 Autidistance Tariffs |
| Tariff Choice | Manual Radio Automatic at pre-programmed: - Distance(s) - Time(s) - Date(s) - Fare(s) - Amount(s) |
| Tariff Program Change | Manual by Key Via Radio By Programmer By Chip Card By Infrared Programmer |
| Peripheral Connections | - Printer - Magnetic Card Reader - Chip Card Reader/Writer - Infrared Passenger Sensor - Mobile Data Terminal - Modem - Cellular Phone |
| Communications Ports | - Internal COM1 and COM2 RS232 +/- 12 Volts STD Baud Rate from 300 to 15200 Baud - 4 Input / Output TTL level |
| Communications Protocols | GMSI Mobilstar RomaNet Telecom It. (Upgradable) |
| Operative Firmware | Upgradable firmware on Flash |
| Transducer | Mechanical Hall Effect or Internal adapter for electronic speedometer up to 100.000 l/km |
| Power Outputs | 1 Roof Light 25 Watts 4 Programmable power outputs 5 Watts |